Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Tempe, AZ
We provide independent HeatShield service across Tempe, from Level 2 inspection and creosote removal through cap installation. What makes our HeatShield work here different is timing: because most Tempe fireplaces sit idle from March through November, liner evaluations usually happen in spring, before monsoon, when the flue can be opened, swept and scoped with a camera and the evidence is clear. HeatShield is a flue resurfacing product, and the work only holds up when the clay tile underneath is dry, clean and structurally sound. That is the check we run on every Tempe call. Reach us at (866) 942-9144 and we’ll book a sweep and inspection.
Why Tempe Residents Choose Us for HeatShield Service
HeatShield work rewards familiarity. A cast liner coating is applied blind, so the crew’s judgment about whether the substrate will take it matters more than the brush. Our technicians have up to 14 years of experience reading clay tile, and we work with HeatShield as one of six professional chimney-industry brands in our toolkit, alongside DuraFlex, Gelco, Olympia Chimney, Famco and Copperfield.
We’re an independent shop, not manufacturer-affiliated or authorized. That means we recommend a HeatShield coating when the tile calls for it and say so plainly when a reline or rebuild is the better answer. Parts fit the system: the cast material and stainless components stay OEM because the cured thickness and thermal rating are what the system was engineered around, while screens, caps and dampers can be quality aftermarket when they meet the same spark-arrest and fit specifications.
Tempe homeowners get one point of contact from inspection through completed repair, with no handoffs. Call (866) 942-9144. We answer 24/7.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Tempe
- Coating blistering over a wet or poorly cleaned tile interface. A HeatShield coating laid over a damp, dusty substrate can blister, delaminate or debond. In Tempe this often surfaces on a Level 2 video scan after an off-season sweep, when the flue has dried out and the failure is visible.
- Smoke cross-drafting through gaps in the cured liner. Voids in a cast HeatShield liner show up as smoke drifting back into the room. It’s most noticeable on the small brick fireplaces in the 1950s – 70s ranch homes near downtown Tempe, where original flue tiles are narrow and often hairline-cracked from heat cycling.
- Nesting material packed behind a HeatShield cap. Pack rats drag twigs and cholla into uncapped flues across Tempe. If the cap isn’t screened correctly, that debris holds desert dust and moisture against the liner surface and speeds up spalling and crown deterioration.
- Insulation wrap over a spalled or degraded flue. HeatShield liner wrap applied where the clay is already spalling or the mortar has broken down doesn’t fix the crown or flashing leak underneath. Water gets back in at the first monsoon and undermines the coating.
- Coating specified where the substrate has shifted. When tile has moved or the flue is too far gone, a cast coating is money spent on a failing base. A full reline with DuraFlex or a rebuild is the honest recommendation.
HeatShield Service in Tempe: What Local Conditions Mean for Your Equipment
The ranch homes around ASU and downtown Tempe were built in the 1950s through the 1970s with small masonry fireplaces and narrow original clay tile flues. Those flues were sized for occasional wood burning, not for the temperature swings of repeated cycles. Year after year of a few fires in December and February, then eight months of sitting cold through a Phoenix-basin summer, is hard on clay. Hairline cracks develop, and the flue stops sealing properly.
That pattern is why HeatShield evaluations in Tempe land in spring. The flue has been idle since roughly February, the dust storms have stopped, and there’s a clear window to sweep out grit and nest material, run a Level 2 camera scan, and decide whether the tile will hold a cast liner coating or needs a reline. Push that evaluation into June and you’re racing the monsoon. Catching a crown or flashing leak before the first storm is cheaper than catching it after.
HeatShield Models & Products We Service in Tempe
We work with the HeatShield Cerfractory Flue Sealant, a cast-in-place insulating liner coating, and with the HeatShield Resurfacing System applied over damaged clay tile flues. We service HeatShield flue relining for gas-converted and insert-equipped fireboxes, which covers a lot of the newer south Tempe stock, and HeatShield liner wrap insulation where a masonry exterior needs it.
Choosing parts is straightforward. The cast liner material stays OEM because the cured thickness is what the system’s thermal rating depends on. Caps, screens and dampers are matched to the flue’s actual dimensions and spark-arrest needs rather than swapped for whatever’s nearby. We diagnose before we quote, so the product recommendation follows the camera evidence.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Tempe
We don’t publish a flat HeatShield price because no two flues are the same. The scope of the work sets the number, and the written estimate sets the final price.
- Sweep and Level 2 inspection: quoted per job, based on flue length and accessibility
- Creosote removal: quoted by severity once the camera shows what’s in there
- Cap installation: quoted by cap size and screen specification
- HeatShield resurfacing or relining: quoted after the inspection confirms the tile will take it
The estimate is free, and it comes with the camera findings so you’re not deciding on a number alone. Call (866) 942-9144 for an exact quote.
Serving Tempe, AZ – Our Local Coverage Area
We serve Tempe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – HeatShield Chimney Cleaning in Tempe
Not automatically. A few fires a year produces little creosote, but the flue still sits through a hot, dusty off-season, and that’s when cracks and nest debris build up. A spring inspection tells you whether the tile is sound. If it is, cleaning and a proper cap may be all you need. Call (866) 942-9144 for a free estimate.
Often, yes, when the tile is intact enough to receive a cast liner coating. Narrow flues near downtown Tempe and ASU are exactly where hairline heat-cycle cracks show up, and a cast coating can restore the seal. It only works over a clean, dry, structurally sound substrate. If the tile has shifted, we’ll tell you so.
Only with a correctly screened cap. Pack rats in Tempe drag twigs and cholla into uncapped flues, and a cap without a proper spark-arrest screen lets the debris collect behind it. We size the cap and screen to the flue so nesting material stays out and the liner surface isn’t held damp.
It holds up when it’s applied over a sound, dry substrate and the crown and flashing are sealed. Heat cycling and monsoon moisture are what attack a coating that was laid over a leak or a dusty interface. That’s why we run the camera scan before quoting any coating work. Call (866) 942-9144 to book the inspection.
Sometimes. Gas-converted fireboxes in south Tempe often already have metal liners, and the question is whether the existing liner is venting correctly and whether the masonry around it needs wrap insulation or repair. We evaluate the specific flue rather than applying a coating by default. The free estimate will tell you which path makes sense.
Service Areas Near Tempe
We also handle HeatShield work in Chandler and Mesa, plus Gilbert, Maricopa and Komatke. If you’re just outside Tempe, call and we’ll confirm coverage and book a sweep.
Book Your HeatShield Service in Tempe Today
Whether your flue needs a sweep, a cast liner coating or honest advice that it can wait, we’ll show you the camera evidence and quote from there. Call (866) 942-9144. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
Written by the team at Chimney Sweep Gilbert.