Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Mesa
If your Mesa chimney is cracking, leaking, or venting smoke into the house, the fix starts with a camera inspection, not a sales pitch. We handle mortar repointing, spalling brick repair, crown and flashing work, and full rebuilds for Mesa homeowners, and we quote only what the inspection actually shows. Our technicians have up to 14 years of experience, and we work with trade-grade materials from names like HeatShield and DuraFlex rather than hardware-store substitutes. Call (866) 942-9144. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Mesa Homeowners Call Chimney Sweep Gilbert for Chimney Repair
Mesa’s fireplace stock has a personality of its own. The huge ranch-home build-out of the 1970s and 80s left thousands of wood-burning fireplaces and early prefab inserts across ZIP 85216 and the neighborhoods around it, and most of those chimneys were never designed for the way people actually use them now. That’s the kind of work we understand, and it’s why our chimney repair team gets called back to the same streets.
We’re a chimney specialist, not a general handyman with a brush. That means one team handles the sweep, the inspection, and the structural repair, so you’re not handed off between contractors when a routine cleaning turns up a cracked clay-tile liner or a failing crown. Our technicians have up to 14 years of experience, and we’ve built a reputation across Mesa on honest diagnostics – the report shows you what the camera sees, and we tell you plainly when a repair can safely wait.
Response time matters when a monsoon leak is running down your flue. We book Mesa calls into the next available opening, Sunday through Friday, 7am to 7pm, and dispatch is fast once you’re scheduled. We’re closed Saturday. You’ll find the same full-cycle service across Mesa and the surrounding East Valley, and homeowners keep coming back because the estimate matches the work.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Mesa
Chimney Flashing Repair in Mesa usually comes down to the seam where the roof meets the stack, and that seam takes a beating from monsoon downpours and haboob dust that work grit into every gap. Flashing is the metal that seals the chimney to the roof; when it lifts, rusts, or was installed with the wrong step and counter-flashing, water runs straight into the attic and down the flue. A typical flashing repair in Mesa runs $250 to $650, depending on roof pitch, whether the shingles need to be lifted, and whether the whole assembly gets rebuilt. It’s one of the cheapest fixes on a chimney and one of the most expensive to ignore.
Step and Counter-Flashing
The step flashing tucks into each course of shingles, and the counter-flashing folds over the top of it. When those two pieces separate, wind-driven rain finds the gap. We rebuild the assembly so the layers overlap the way they should, using Famco components that fit the stack properly.
Sealing Around the Stack
A bead of sealant alone won’t hold through a Mesa summer. Once the flashing is sound, we seal the joints with a chimney-rated product that flexes with heat and stays put. You’ll see the difference at the next hard rain, not just on the invoice.
Chimney Crown Repair in Mesa
Chimney Crown Repair in Mesa is the fix we recommend most often, because the low desert is hard on the concrete cap on top of a chimney even without a single freeze. The crown is the sloped slab that sheds water away from the flue; when it sun-cracks, monsoon rain seeps in behind it and soaks into the masonry below. That trapped moisture is what drives spalling brick and rusted prefab parts. A typical crown repair in Mesa runs $350 to $900, and a full crown rebuild with a proper overhang and bonded seal costs more than a patch job.
Why Desert Heat Cracks the Crown
Years of 100°F-plus summers expand and contract the concrete until hairline cracks open. Our technicians have up to 14 years of experience spotting the difference between a surface crack and a structural one. If the crown is only lightly checked, sealing may be enough; if it’s crumbling, we rebuild it.
Rebuilding the Crown to Shed Water
A proper crown slopes away from the flue on all sides and overhangs the masonry so runoff clears the brick. We form it with a flexible, crack-resistant mix using HeatShield materials. That stops the cycle of water getting in and freezing – or, here, baking – before it can do damage.

Trusted Brands We Service in Mesa
We specify our repair and relining materials from the brands the chimney trade actually uses: DuraFlex flexible liner systems, HeatShield resurfacing products, Olympia Chimney components, Famco caps and dampers, Gelco, and Copperfield. That matters in Mesa because trade-grade parts fit correctly and last through the heat. We don’t claim to stock parts locally – what we do is order the right component for your flue and get it installed without delays. If your chimney needs a new cap or damper, you’ll get a manufacturer-spec fit, not an improvised substitution.
Common Chimney Repair Problems We See in Mesa Homes
- Sun-cracked crowns letting in monsoon water. A concrete crown that’s checked and cracked lets rain seep into the flue chase. That moisture drives spalling brick below and rusts out prefab components you can’t see from the ground.
- Cracked clay-tile liners from thermal cycling. Years of heating and cooling crack the original tiles, and creosote migrates into the chimney structure through those gaps. This is a fire hazard, and it’s why we camera the flue before quoting a liner.
- Uncapped or poorly capped flues full of nests. An open flue is a nesting site for birds and pack rats that block the draft and pile on top of old creosote. A proper cap from a brand like Copperfield solves it.
- Worn-out 1980s prefab fireboxes. Many original zero-clearance units are past their service life, with rusted flues and cracked refractory panels that fail inspection. Safety first: these units need a trained eye before the next fire.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Repair in Mesa, AZ
We price per job, and the written estimate sets the final number, so you know the cost before we start. Here’s what Mesa homeowners typically see for the common repairs:
- Chimney flashing repair: $250 to $650
- Chimney crown repair or rebuild: $350 to $900
- Mortar repointing and tuckpointing: $400 to $1,200
- Spalling brick repair: $500 to $1,500
- Chimney waterproofing: $300 to $800
- Partial chimney rebuild: $1,500 to $4,000
What moves the number is how far the water damage has spread, whether the flue needs relining, and how much masonry has to come apart. Estimates are free, and nothing gets recommended without camera evidence you can see for yourself. If a repair can safely wait a season, we’ll tell you.
We Also Serve Cities Near Mesa
Mesa sits in the middle of the East Valley, and we work across the surrounding communities too. If you’re in Gilbert, Tempe, Chandler, or Lower Santan Village, the same full-cycle service applies: one team for the sweep, the inspection, and the structural repair. Same brands, same evidence-first approach, same free estimates. Call and we’ll book you into the next opening.
Serving Mesa, AZ – Our Local Coverage Area
We serve Mesa and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Mesa
Yes. A chimney that sits unused still collects dust, nests, and sun-cracked mortar, and old creosote hardens while it waits. We answer 24/7. An inspection shows you what’s actually inside before you light the first fire in years. Call (866) 942-9144 for a free estimate.
First-degree creosote is a light soot that brushes off; third-degree is a hardened, glazed layer that a brush won’t touch and that burns hot. Mesa’s sporadic use means buildup often hardens over years, so the camera tells us which one you have. Our technicians have up to 14 years of experience with both. Call for a free estimate.
You usually can’t from the room – rusted flues and cracked refractory panels hide behind the firebox. Many original Mesa prefab units are failing inspection now, and only a camera check confirms it. Safety matters here: have it looked at before the next fire. Call (866) 942-9144.
Intense summer heat expands and contracts the concrete crown until hairline cracks open, and haboob dust works into them. No freeze-thaw needed. A sloped, sealed crown stops the seepage that follows. Call for an exact quote – estimates are free.
Usually, yes. Flashing repairs fix the seam at the roof without touching the masonry above, at a fraction of a rebuild. We only recommend a full rebuild when the inspection shows the structure itself is compromised. Call (866) 942-9144 for a free estimate.
Get Your Mesa Chimney Fixed Right
Whether your chimney needs a quick flashing repair or a full crown rebuild, the first step is a camera inspection that shows you exactly what’s wrong. We diagnose before we quote, use trade-grade materials, and tell you when a repair can wait. Call (866) 942-9144 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday.
Written by the team at Chimney Sweep Gilbert.