Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Komatke
If your chimney is smoking back into the room, leaking at the roofline, or packed with debris after a season of disuse, we handle the repair. We work on the stucco and adobe ranch homes that make up most of Komatke, and we know this part of the Gila River Indian Community well enough to plan a service visit around the long drives and the older, non-standard chimneys that come with some properties here. Our technicians have up to 14 years of experience, and we diagnose before we quote. Call (866) 942-9144. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Why Komatke Homeowners Call Chimney Sweep Gilbert for Chimney Repair
Repair work on the Community asks for more than a standard sweep-and-go visit. Many Komatke homes burn wood as their main winter heat, so the flues carry far heavier creosote loads than the lightly used fireplaces you find in Tempe or Chandler. That changes how we inspect, what we look for, and what we recommend.
We also treat chimneys as a full system: sweep, repair, and inspection under one company, so you deal with one point of contact from the first visit through finished work rather than being handed off between trades. On a Komatke job that often means moving between a sweep, a cap repair, and a liner resurface in the same visit.
The other thing that builds trust here is the materials. We install trade-grade products from DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield, specified to fit your flue rather than improvised from hardware-store parts. When a repair is quoted, the price is set by the written estimate, and nothing is recommended without evidence you can see. It’s a straight answer, not an upsell.
For scheduling, we plan Komatke calls with the drive in mind. Call (866) 942-9144 for an exact quote. Estimates are free.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Flashing Repair in Komatke
Chimney Flashing Repair in Komatke is usually about the seam where the stack meets the stucco, and that seam takes a beating when monsoon wind and dust storms push grit and water against it. Flashing is the metal that sheds water away from that joint. When it rusts through, loosens, or pulls away from the stucco, water finds its way into the chimney and shows up as a stain on the ceiling or a leak at the roofline. A typical flashing repair in Komatke runs $250 – $550, depending on access and how much of the old metal has to be cut out and replaced. A Level 2 inspection confirms whether the flashing or the crown is the real source before we quote.
When flashing is the likely culprit
A leak that shows up only after wind-driven rain, or that leaves a stain low on the stack where it meets the roof, usually points to flashing rather than the crown. Water running down the outside of the flue and pooling at that joint is a common sign. We always check the crown at the same time, because the two fail in similar weather.
How we reseal the stack joint
We remove the failed flashing, clear and prep the surface, and set new metal against the stucco so it sheds water the way it was designed to. A proper sealant and a check on the surrounding roof help the repair last. Once the joint is sound, we confirm the inside of the flue is dry before we consider the job closed.
Chimney Crown Repair in Komatke
Chimney Crown Repair in Komatke comes up often on older stucco and adobe ranch homes, where the concrete cap at the top of the stack has cracked after years of desert heat and monsoon wind. The crown is the sloped top that sends water off the chimney instead of into it. Once it cracks, water works down into the masonry and the flue, and the damage spreads. A typical crown repair in Komatke runs $350 – $800, and a full re-crown is more than a patch. We use HeatShield resurfacing products where they’re the right fit, and we build the new crown to shed water away from the flue opening.
Patching versus re-crowning
A hairline crack can sometimes be sealed and sealed well. A crown that has broken apart, pulled away from the flue, or is holding water needs to come off and be rebuilt. We tell you which one your chimney actually needs after we’ve looked at it.

The crown and your draft
A damaged crown lets water into the flue and often lets debris in with it, which is one reason a chimney smokes poorly. Fixing the top of the stack is often the first step toward restoring proper draft. We check the damper and smoke chamber at the same time so the whole system is working when we’re done.
Trusted Brands We Service in Komatke
We install and work with products from the chimney industry’s recognized suppliers: DuraFlex flexible liners, HeatShield resurfacing systems, Olympia Chimney, Famco, and Copperfield caps, dampers, and accessories. That roster is deliberate. It’s trade-grade material specified to fit your flue, not a rental brush and a generic cap. We don’t claim to stock parts on a truck or hold inventory in a local yard; what we do is source the right component for the job and turn the work around without sending you to a big-box store to guess at a fit. When a Komatke chimney needs a cap, a liner, or a damper, it gets the manufacturer-spec part for that flue.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Komatke Homes
- Woodrat nests packed into flues and cooler ducts. Desert woodrats routinely fill chimneys and evaporative-cooler ducts with cholla joints and debris, which blocks draft and can turn a routine sweep into nest removal plus a screened-cap repair. A cap that fits properly is the fix that keeps them out.
- Monsoon damage to crowns and flashing. Summer wind and dust storms crack crowns and loosen flashing on older stucco and adobe homes. The grit and water that get in then sit in flues that go unused for months.
- Heavy creosote from wood-stove heat. Homes that burn wood as their primary winter heat build creosote fast, and on a once-a-year schedule that load is often overdue by the time anyone looks. Catching first-degree creosote before it glazes is the whole point of inspecting early.
- Non-standard chimneys in older and self-built homes. A share of Komatke homes are HUD-style or self-built with non-standard chimneys, which means the repair has to be fitted to what’s actually there. That’s where correct liner and cap specification matters most.
Pricing for Chimney Repair in Komatke, AZ
Typical repair pricing in the Komatke area breaks down roughly like this: flashing repair runs $250 – $550, crown repair and re-crowning run $350 – $800, mortar repointing and tuckpointing run $300 – $900 depending on how much mortar joint is rebuilt, chimney waterproofing runs $300 – $650, and full relining with a DuraFlex system runs higher because it’s a bigger job. Spalling brick repair and chimney rebuilding sit above that, priced per job once the extent is known. Access, roofline height, and how much old masonry has to come out all affect the number. You get a free estimate, and the written estimate sets the final price.
We Also Serve Cities Near Komatke
Komatke sits south and west of the Phoenix metro, and we also take chimney repair calls in Tempe, Chandler, Gilbert, and Mesa. If your home is on the edge of the city line or just off the main roads between Komatke and these towns, we can still plan the visit. Reach out to our chimney repair team and we’ll confirm the drive and the scope.
Serving Komatke, AZ – Our Local Coverage Area
We serve Komatke and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Komatke
Yes. Wood stoves used as primary winter heat in Komatke build creosote far faster than the lightly used fireplaces common in metro Phoenix, so a once-a-year sweep is often overdue here. A flue that carries steady winter burn should be checked on a tighter interval, and inspection should catch first-degree creosote before it glazes into the hard, slick third-degree stage a brush can’t remove. Call (866) 942-9144 for an exact quote. Estimates are free.
A flue that sits idle all summer collects dust, soot, and often a woodrat nest, and that blockage is what pushes smoke back into the room when you light the first fire. Months of zero use let the debris accumulate, and the cool desert nights before winter can make the smell worse. It’s a sign to inspect before you burn, not after.
Wood stoves here mostly build first-degree creosote, a flaky, soot-like coating that a proper sweep removes cleanly. The risk is time: left too long it moves toward glazed third-degree creosote, which needs chemical treatment and sometimes relining rather than a brush, and it’s the stage that raises chimney-fire risk. Catching it early keeps both the cost and the danger down.
It’s usually one or the other, and sometimes both. A leak low on the stack where it meets the roof points to flashing, while water that shows up around the flue opening at the top points to a cracked crown. We confirm which with a Level 2 inspection and camera evidence you can see before we quote. Call (866) 942-9144 for an exact quote. Estimates are free.
Once a year, even in a season when the fireplace and stove went unused. Desert heat, monsoon wind, and woodrat activity all work on a flue whether or not there’s a fire in it, and older Komatke homes with non-standard chimneys need the closer look. An inspection catches a cracked crown, loose flashing, or a nest long before it becomes a repair.
Ready to get your chimney looked at? Call (866) 942-9144 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you’re on the Gila River Indian Community or anywhere in Komatke, we’ll plan the visit, inspect first, and quote the repair in writing.
Written by the team at Chimney Sweep Gilbert.