HeatShield Chimney Cleaning in Tempe, AZ

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

HeatShield Chimney Cleaning in Tempe, AZ

We provide independent HeatShield service across Tempe, from Level 2 inspection and creosote removal through cap installation. What makes our HeatShield work here different is timing: because most Tempe fireplaces sit idle from March through November, liner evaluations usually happen in spring, before monsoon, when the flue can be opened, swept and scoped with a camera and the evidence is clear. HeatShield is a flue resurfacing product, and the work only holds up when the clay tile underneath is dry, clean and structurally sound. That is the check we run on every Tempe call. Reach us at (866) 942-9144 and we’ll book a sweep and inspection.

Call (866) 942-9144

Why Tempe Residents Choose Us for HeatShield Service

HeatShield work rewards familiarity. A cast liner coating is applied blind, so the crew’s judgment about whether the substrate will take it matters more than the brush. Our technicians have up to 14 years of experience reading clay tile, and we work with HeatShield as one of six professional chimney-industry brands in our toolkit, alongside DuraFlex, Gelco, Olympia Chimney, Famco and Copperfield.

We’re an independent shop, not manufacturer-affiliated or authorized. That means we recommend a HeatShield coating when the tile calls for it and say so plainly when a reline or rebuild is the better answer. Parts fit the system: the cast material and stainless components stay OEM because the cured thickness and thermal rating are what the system was engineered around, while screens, caps and dampers can be quality aftermarket when they meet the same spark-arrest and fit specifications.

Tempe homeowners get one point of contact from inspection through completed repair, with no handoffs. Call (866) 942-9144. We answer 24/7.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common HeatShield Chimney Cleaning Problems We Solve in Tempe

  • Coating blistering over a wet or poorly cleaned tile interface. A HeatShield coating laid over a damp, dusty substrate can blister, delaminate or debond. In Tempe this often surfaces on a Level 2 video scan after an off-season sweep, when the flue has dried out and the failure is visible.
  • Smoke cross-drafting through gaps in the cured liner. Voids in a cast HeatShield liner show up as smoke drifting back into the room. It’s most noticeable on the small brick fireplaces in the 1950s – 70s ranch homes near downtown Tempe, where original flue tiles are narrow and often hairline-cracked from heat cycling.
  • Nesting material packed behind a HeatShield cap. Pack rats drag twigs and cholla into uncapped flues across Tempe. If the cap isn’t screened correctly, that debris holds desert dust and moisture against the liner surface and speeds up spalling and crown deterioration.
  • Insulation wrap over a spalled or degraded flue. HeatShield liner wrap applied where the clay is already spalling or the mortar has broken down doesn’t fix the crown or flashing leak underneath. Water gets back in at the first monsoon and undermines the coating.
  • Coating specified where the substrate has shifted. When tile has moved or the flue is too far gone, a cast coating is money spent on a failing base. A full reline with DuraFlex or a rebuild is the honest recommendation.

HeatShield Service in Tempe: What Local Conditions Mean for Your Equipment

The ranch homes around ASU and downtown Tempe were built in the 1950s through the 1970s with small masonry fireplaces and narrow original clay tile flues. Those flues were sized for occasional wood burning, not for the temperature swings of repeated cycles. Year after year of a few fires in December and February, then eight months of sitting cold through a Phoenix-basin summer, is hard on clay. Hairline cracks develop, and the flue stops sealing properly.

That pattern is why HeatShield evaluations in Tempe land in spring. The flue has been idle since roughly February, the dust storms have stopped, and there’s a clear window to sweep out grit and nest material, run a Level 2 camera scan, and decide whether the tile will hold a cast liner coating or needs a reline. Push that evaluation into June and you’re racing the monsoon. Catching a crown or flashing leak before the first storm is cheaper than catching it after.

Questions about your chimney cleaning?Free estimate, price agreed before work starts
Call (866) 942-9144

HeatShield Models & Products We Service in Tempe

We work with the HeatShield Cerfractory Flue Sealant, a cast-in-place insulating liner coating, and with the HeatShield Resurfacing System applied over damaged clay tile flues. We service HeatShield flue relining for gas-converted and insert-equipped fireboxes, which covers a lot of the newer south Tempe stock, and HeatShield liner wrap insulation where a masonry exterior needs it.

Choosing parts is straightforward. The cast liner material stays OEM because the cured thickness is what the system’s thermal rating depends on. Caps, screens and dampers are matched to the flue’s actual dimensions and spark-arrest needs rather than swapped for whatever’s nearby. We diagnose before we quote, so the product recommendation follows the camera evidence.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (866) 942-9144

HeatShield Service Pricing in Tempe

We don’t publish a flat HeatShield price because no two flues are the same. The scope of the work sets the number, and the written estimate sets the final price.

  • Sweep and Level 2 inspection: quoted per job, based on flue length and accessibility
  • Creosote removal: quoted by severity once the camera shows what’s in there
  • Cap installation: quoted by cap size and screen specification
  • HeatShield resurfacing or relining: quoted after the inspection confirms the tile will take it

The estimate is free, and it comes with the camera findings so you’re not deciding on a number alone. Call (866) 942-9144 for an exact quote.

Serving Tempe, AZ – Our Local Coverage Area

We serve Tempe and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – HeatShield Chimney Cleaning in Tempe

Service Areas Near Tempe

We also handle HeatShield work in Chandler and Mesa, plus Gilbert, Maricopa and Komatke. If you’re just outside Tempe, call and we’ll confirm coverage and book a sweep.

Book Your HeatShield Service in Tempe Today

Whether your flue needs a sweep, a cast liner coating or honest advice that it can wait, we’ll show you the camera evidence and quote from there. Call (866) 942-9144. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.

Written by the team at Chimney Sweep Gilbert.

Need Chimney Cleaning help in Tempe? Licensed & insured · free written estimates
Call (866) 942-9144
Local Service Coverage

Request a Free Estimate in Tempe

Tell us what you need - Chimney Sweep Gilbert responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Call Now - We Answer 24/7